Flashing Beacon
GL7T
The GL7T Flashing Beacon preserves the rugged, IP69K-rated durability, with excellent resistance to vibration and impact, just like the GL7. Its slimmer housing and upward-facing lens make it ideal for wall-mounted or low-set installations where upward visibility and compact form are essential.
- I/O Control
- CAN communication control
- Φ68
- Signal Beacon
- Flashing (Strobe)
- Pulse (Sine Wave)
- Continuous on
- Indoor
- Outdoor
- IP69K
- Red
- Amber
- Green
Product Features
Durable Compact Signal Light for Harsh Industrial Environments
Built for Harsh Operating Conditions
- Resistance to Vibration and Shock
![[Vibration res.] 110 m/s², [Shock res.] 1,000 m/s²](/data/product_img/uk/gl7_product_1.png)
- Ingress Protection Against Dust and Water
Meets key international standards, including EMC (ISO 13766-1) and environmental durability (ISO 16750).
Compact, Space-Saving Housing
Slender profile requires minimal mounting space – ideal for compact machinery, such as construction equipment and forklifts.
Multiple Flash Patterns to Suit Your Application
- Three-colour LED with distinctive flash modes provides clear and intuitive status indication.
- Visibly differentiated patterns support recognition by users with colour vision deficiency.
>> View all flash patterns here
Two Control Interfaces
CAN Bus Control
- Compatible with SAE J1939 protocol, commonly used in construction and mobile equipment.
- Controls 13 flash patterns and 4 brightness levels via command-based interface.
- Supports real-time status monitoring to enhance system diagnostics and operational safety.
- Automatically detects 250 kbps or 500 kbps communication speed – no manual configuration required.
Hard-Wired Input Control
- Operated via direct signal inputs; no communication protocol required.
- Each colour is pre-set with a fixed flash pattern, aiding identification even in colour-impaired scenarios.
Note: This model does not support real-time feedback or pattern configuration.
Example Applications
Visual Signalling in High-Noise Environments
Indicator for Equipment Status
Optional Accessory
Magnetic Mounting Bracket
Quick Installation via Magnetic Base
The optional magnetic bracket enables non-invasive installation – ideal for rental or temporary setups, requiring no drilling or permanent modification*.
Applicable Models: GL7-M1N-T, GL7T-M1N-T, GL7-M1N-Y, GF7-48N-Y
Note: When installed using GL-001, vibration resistance is limited to 45 m/s².
Model Number Configuration
Model Code
Product Line-up
Three-Colour Multi-Colour Models
| Model | Rated Voltage | Control Method | Light Colours | Flash Modes |
|---|---|---|---|---|
| GL7T-M1N-T | 12–24 V DC | Voltage Control | 3 Colours (Red, Amber, Green) |
Fixed Flash Mode per Colour |
| GL7T-M1NC1-T | CAN Bus (J1939) | Selectable: Flashing, Steady On, Soft Blink, etc. |
WEB Catalog
Instruction Manual/Specifications/Outside Drawing
(*) The download service of the data on this site is deemed to have agreed to the following "".
Instruction manual [Digest version](EN) File Downloads
(*) The download service of the data on this site is deemed to have agreed to the following "".
Instruction manual
2D CAD / 3D CAD
2D_CAD［dxf］Product Specifications
TERMS AND CONDITIONS FOR DATA DOWNLOAD
1.Ownership of rights
Copyright and other intellectual property rights in the data downloadable from this site belong to PATLITE CORPORATION (“PATLITE”) or the right holders from whom PATLITE has obtained necessary licenses for the use thereof.
2.Use of data
Users of this site, who are also registered members of PATLITE Web Member, (“User”) may use the data downloaded from this site (“Downloaded Data”) free of charge and on a non-exclusive basis, solely in accordance with these Terms and Conditions for Data Download (“Terms”).
3.Purpose
The data disclosed on this site (“Disclosed Data”) and Downloaded Data may be used only for the following purposes:
- Messages, melodies, alarm sounds, and other audio data (“Audio Data”) or software data (“Software Data”). Users of PATLITE products may transfer Audio Data and/or Software Data to PATLITE products and run such data on PATLITE products only.
- CAD data of PATLITE (“CAD Data”) or PATLITE product specification data (“Products Specification Data”). Users of PATLITE products may consult such data for the purpose of repair or renewal of PATLITE products. Prospective buyers of PATLITE products may also use the data for evaluation.
4.Prohibited acts
- Downloaded Data may not be reproduced, modified, altered, decomposed, disclosed, replicated elsewhere, assigned, or loaned in whole or in part.
- Audio Data must not be used for any purpose other than those stated in Article 3; Audio Data must not be used with non-PATLITE products.
- Software Data must not be used for any purpose other than those stated in Article 3; Software Data must not be used with non-PATLITE products.
5.Notes on Disclosed Data and Downloaded Data
Please acknowledge the following before using Disclosed Data and/or Downloaded Data:
- Not all models released by PATLITE in the past are disclosed as Disclosed Data on the site.
- Some products included in Disclosed Data may have been discontinued or may no longer be available for sale.
- Disclosed Data reflects the state of products at the time of their release.
- PATLITE reserves the right to determine the type and content of Disclosed Data and the period of availability.
- Software Data is not supported by all computer appliances; some may not import the data in full or in part.
- CAD Data do not guarantee the specifications and/or performance of the corresponding products.
- PATLITE does not warrant that the values extracted from the drawings in the CAD Data match actual products.
- The CAD Data is provided in an intermediate file format for exchanging CAD data, which may not be supported by all applications. Some CAD applications may fail to import the data in full or in part.
- If the User intends to export or provide Downloaded Data to non-residents, they must comply with the Foreign Exchange and Foreign Trade Act of Japan, the US Export Administration Regulations, and other applicable laws, and complete all necessary procedures.
6.Downloading CAD data
- PATLITE does not guarantee the consistency of values extracted from CAD drawings with actual products. For specifications and dimensions, refer to product specifications.
- 2D data is provided in DXF format (Ver.R12/L12).
- 3D data is provided in the following formats:
A. IGES;
B. STEP;
C. PARASOLID.
7.Downloading Product Specification Data
Safety precautions for PATLITE products are included in the Product Specification Data or in separate hard-copy attachments. However, only product specifications are available on this site, and safety information in such attachments may not be provided online. These precautions may change according to legal requirements.
8.Termination or change of downloading service
Services on this site may be withdrawn or changed without notice. PATLITE reserves the right to revise the Terms without notice. Any revised Terms will apply immediately upon announcement on this site.
9.Termination of utilizing agreement
PATLITE may terminate the agreement if a User violates the Terms, commits any act against public order or laws, defames PATLITE, or damages PATLITE’s services. In such cases, the User must immediately cease using all Downloaded Data. This provision also applies if the User loses membership status.
10.Limitation of Liability
PATLITE is not liable for any damages resulting from the use or inability to use services on this site (including but not limited to data loss, suspended operation, and loss of business information), even if the risk of damage or third-party claims was known in advance.
